online service

Skype: 点击这里给我发消息
Product:W-BGC pro
Product multi-angle display:

W-BGC PRO 3-Axis Gimbal Controller Instrcution Manual

Thank you for choosing Elitepower W-BGC PRO gimbal controller . This controller equipped with latest 32-bit MCU ARM Cortex and Elitepower improved attitude estimation algorithm. It features at mini dimensions, high sensitivity and friendly user interface, see more detailed features in below list:

The controller can be used for building BIG gimbal for Professional use 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers.  Unlike the Simple BGC board, this board is built for heavy duty and high power output with CNC aluminum protected case. 

Basic functions of the controller

-       32-bit MCU ARM Cortex M4. Effectively calculates the complex tasks for 3-axes stabilization.
- Allows camera control with the RC or analog joystick.
- Use several switchable profiles for different modes of operation
- Supports variety of RC protocols: PWM, Sum-PPM, spektrum and s-bus.
- Battery voltage monitoring, compensating voltage drop in the PID-regulator.
- Low battery alarm (output to 5V active buzzer).
- Increased number of inputs for controlling signals + 3 additional reserved input/output AUX1-AUX3.
- Dedicated UART-socket to connect optional Bluetooth module
- Reverse-polarity protection, overheat and overcurrent protection
- Improved attitude estimation algorithms
- Optional second IMU, that will increase the short-term precision of the stabilization 10x-30x times and will make stable work in any frame position.

All CNC machining process metal jacket case

-       Plug and play ,easy to use

Continue 20Amps output per each motor port ,best choice for industrial gimbal system

-       Super mini design easier for installation

-       High power mosfet 90A) more suitable for high current

-       100% QC,ensure safty and reliable
- 12-26volts
- Built in cooling fan
good for heat dissipation
- Built in 12v/4A DC Regulator to power auxiliary devices.
- Reversible IMU cable (polarity protection)
- 2 x Advanced Address switchable IMUs (easily change between frame and camera) with power indicator (Blue LED)
- Additional 4 Pin JR port for IMU Connection
- Built-in Power Switch
- Built-in Buzzer
- Built-in Power Indicator RED LED
- Built-in IMU Status/Battery Sensor Indicator Green LED
- Modular Female connectors for motors
- 2 mounting holes for IMU (26mm)

Packing info
- 1x 3 axis board fully enclosed in CNC case
- 1x IMU fully enclosed in CNC case (switchable between Frame and Camera mode)
- 1x IMU 75cm cable with connector on both end

Optional parts

- 1x  Second IMU fully enclosed in CNC case (switchable between Frame and Camera mode)
- 1x IMU 45cm cable with connector on both end

- Main controller: 84x54x17 113grams
- IMU:  22x22mm 6.7grams
- IMU cable diameter 2.5mm
- Main power cable 16awg

Copyright © ETECPOWER All rights reserved .sitemap nihao39